Guide homeAll topicsDentsPaintVehicles & materialsSafetyFind a pro
DRAFT: general information, to be checked by a partner technician before publishing. It is not repair instructions; always follow the maker's information.
Source-reviewed draft. Source review: done 25 October 2026 against public sources (level C and D; no industry standard found). Technician review: not done. Release decision: Jimmy.
Who is this for?
Owners of caravans, trailers and vans with aluminium or composite panels. Know and refer.
What to know
- Check the construction first: aluminium sheet, aluminium over a composite, or a bonded panel. This decides what can be done.
- Paintless methods may work on shallow, crease-free dents. Hail or sharp dents usually mean a panel replacement or a specialist (forum and maker support pages).
- Aluminium melts or blows holes with too much heat. A caravan magazine's DIY test found flame and a wet rag only half worked, a glue-pull kit did not lift sharp hail divots, and screw-and-pliers pulls leave holes to seal.
- Access may need inner linings removed, and many shops decline caravan work.
- A US trade association began a study on repairing hail-damaged aluminium vehicles in 2015. We could not find its result.
What you can safely do
- Photograph the damage, and check your warranty and insurance first.
- Do not use heat.
- The skin is cracked or the seam is open
- There is water inside
- Someone suggests heat
When to see a specialist
- Any hail or sharp dent.
- Any panel that is bonded or has a cracked skin.
Sources and further reading
- Australian caravan magazine: DIY body work test
- Australian forum: removing dents from an aluminium caravan
- Trade news: study of repairing hail-damaged aluminium vehicles (2015)
Source links are for background only. Several are seller or trade pages, so treat claims with care. Technician sign-off: pending.
Rapid Repair is a free guide from the Hail Dent Repair team. Get a quote · Learn PDR properly · Phone 0408 020 468 · Disclaimer and terms