Guide homeAll topicsDentsPaintVehicles & materialsSafetyFind a pro
DRAFT: general information, to be checked by a partner technician before publishing. It is not repair instructions for your vehicle; always follow the manufacturer's repair information.
Source-reviewed draft. Source review: done 24 October 2026 against public professional sources. Technician review: not done. Release decision: Jimmy.
Who is this for?
Everyone. This is a "know" page: it helps you understand why two dents that look alike can need very different repairs. There are no DIY repair steps here.
The type of vehicle decides what the panels are made of, what is behind them and how easy it is to reach the dent. That decides whether a repair is simple, specialist, or not worth attempting at home.
| Vehicle | What to know for repairs |
|---|---|
| Cars (hatch, sedan, wagon) | Mostly steel panels with some aluminium or plastic (bonnet, bumpers, tailgate on newer models). Doors and roofs are usually double-skinned, with braces and cavities behind the dent. |
| SUVs and 4WDs | Larger flat panels dent more easily but are often thicker. Rear tailgates and roof rails add braced areas. Some premium models use an aluminium bonnet, doors or tailgate. |
| Utes and pick-ups | Tubs, tailgates and cab panels. Some current models use aluminium or composite panels. Fleet and work-use vehicles often have previous repairs and touch-ups that affect paint. |
| Vans and light trucks | Large flat panels and ribbed sides. Double-skinned load areas are hard to reach. Many are fleet vehicles, so paint age and previous repainting vary. |
| Heavy trucks and trailers | Different materials (aluminium, fibreglass, steel) and often painted differently. Treat as a specialist job. |
| Electric vehicles and hybrids | Often more aluminium and high-strength steel, and a high-voltage battery and cables under the floor and in the body. See the safety box below. |
| Motorcycles | Fuel tanks (steel, aluminium or plastic) and plastic fairings. Tanks hold fuel, so no heat, grinding or spark near them. Thin metal and curved shapes make DIY repairs risky. |
Panel layout: where the repair is easy and where it is not
- Open skins (some bonnets, guards): often reachable from behind, so push-from-behind repair may be possible.
- Double skins (doors, tailgates, many roofs, some bonnets): an outer skin over an inner panel with only small gaps. Access may need trim, lights or linings removed.
- Braces and ribs (bonnet ribs, roof bows, door intrusion beams): dents on or next to them are harder because the metal cannot move freely.
- Edges and body lines: the metal is stiffer and the stretch is greater, so these need specialist technique.
- Bonded and sealed panels: adhesive between skins can limit heat and access.
Trends: lighter materials
- Manufacturers increasingly use aluminium, high-strength steel and plastics or composites to reduce weight and meet safety targets. The same model can differ between years and trims.
- That means "the old trick that worked on my last car" may not work, or may do harm, on a newer one. Check what the panel is made of (see Metals).
Electric and hybrid vehicles: extra cautions
Why access matters so much
- If a technician cannot get a tool behind the dent, the only option is to pull from the front or repair and repaint. Pulling is the part that can lift paint.
- Cheap DIY kits only work from the front. That is why they only suit small, shallow dents on flat, open panels.
Pros and cons
| Good | Not so good |
|---|---|
|
|
Do and don't
| Do | Don't |
|---|---|
|
|
- The vehicle is electric or hybrid and the damage is near the floor, battery or orange cables
- The dent is on a roof, door edge or a braced area
- You do not know what the panel is made of
- The vehicle is a motorcycle fuel tank
When to see a pro
- Anything on a double-skinned or braced area, any EV/hybrid damage, any damage with cracked paint, aluminium or composite panels.
Sources and further reading
- Vehicle maker repair information: Body Structure Materials and Allowed Operations (example of manufacturer repair information)
- Bodyshop Business: EV safety, battery precautions and welding considerations
- Paint & Panel: free EV courses from I-CAR (Australian trade news)
- Paint & Panel: Axalta and MTA Queensland EV safety awareness course
Source links are for background only. Several are industry or supplier pages, so treat product claims with care. Technician sign-off: pending.
Rapid Repair is a free guide from the Hail Dent Repair team. Get a quote · Learn PDR properly · Phone 0408 020 468 · Disclaimer and terms