Guide homeAll topicsDentsPaintVehicles & materialsSafetyFind a pro
DRAFT: general information, to be checked by a partner technician before publishing. It is not repair instructions; always follow the maker's information.
Source-reviewed draft. Source review: done 25 October 2026 against public sources (level C and D; no industry standard found). Technician review: not done. Release decision: Jimmy.
Who is this for?
Anyone with a dented fuel tank. This is a refer-only page. A fuel tank is a fuel container.
What to know
- Small dents are common in steel tanks. Tank shops pull them with a dent gun; filler is not recommended because the fuel works it loose (car magazine article).
- A heavily dented tank, or one with rust holes or corrosion inside, is usually patched or replaced.
- A tank that held fuel can still hold vapour. A safety alert from a US mining safety authority describes a fuel tank exploding during a welding patch. It says to disconnect the battery, remove ignition sources and drain and purge outdoors or in a well-ventilated place.
- Specialist repairers sometimes fill a fuel tank with water, or use steam, a purge gas or a gas test, to make sure there is no fuel vapour before they weld or solder it. This is done only after the tank is removed and thoroughly cleaned, and only by trained people. Government safety bodies treat even an empty tank as dangerous, and they say to avoid hot work where you can. We do not do this and do not teach it.
- Do not heat, drill, weld, pressurise or freeze a fuel tank. If a tank is dented, leaking or smells of fuel, ask a tank repair specialist or replace it. Plastic tanks need different handling and we found no dent guidance for them.
- For motorcycle tanks see the motorcycle lessons in our technician course.
What you can safely do
- Look for leaks, stains and fuel smell, and keep ignition sources away.
- Photograph the dent and the tank straps and shields.
- You smell fuel or see a leak
- The tank is rusty, split or dented along a seam
- Someone suggests heat or welding
When to see a specialist
- Any tank dent, leak or stain.
- Any fuel smell: stop, ventilate and get help.
Sources and further reading
- Australian car magazine: repairing a dented fuel tank
- US mine safety alert: fuel tank explosion during welding (not about dents)
- SafeWork NSW: hot work on tanks that held flammable liquids
- UK regulator: hot work on containers that held flammables
- NZ government booklet: hot work on drums and tanks (1988)
- US Chemical Safety Board: hot work safety bulletin
Source links are for background only. Several are seller or trade pages, so treat claims with care. Technician sign-off: pending.
Rapid Repair is a free guide from the Hail Dent Repair team. Get a quote · Learn PDR properly · Phone 0408 020 468 · Disclaimer and terms