Guide homeAll topicsDentsPaintVehicles & materialsSafetyFind a pro
DRAFT: general information, to be checked by a partner technician before publishing. It is not repair instructions; always follow the maker's information.
Source-reviewed draft. Source review: done 25 October 2026 against public sources (level C and D; no industry standard found). Technician review: not done. Release decision: Jimmy.
Who is this for?
Anyone whose steel roof or wall cladding was dented by hail. Know and refer. Do not go on the roof.
What to know
- A maker bulletin (seen only as a search summary) says hail dents are mostly cosmetic and do not shorten roof life, except on low-pitched roofs where dents cause ponding, or where sheet overlaps are deformed.
- The same summary says touch-up paint is not recommended and that overpainting can void the warranty.
- Online advice is to push out from underneath and accept a crease, because metal stretched past its elastic limit does not spring back. That is forum advice, not a method.
- No source we read covers roof safety. Falls, fragile sheets and slippery coatings are the real hazard.
What you can safely do
- Photograph the damage from the ground and note dates for your insurer.
- Leave small dents alone.
- Check the warranty before painting or sealing anything.
- Water is pooling or leaking
- Sheet overlaps are bent open
- You are asked to go on the roof
When to see a specialist
- Ponding, leaks, deformed overlaps or rust.
- Anything near solar panels or skylights.
- Any work that needs you on the roof.
Sources and further reading
- Maker technical bulletin on hail damage to steel roofing (seen only as a search summary; the document could not be opened)
Source links are for background only. Several are seller or trade pages, so treat claims with care. Technician sign-off: pending.
Rapid Repair is a free guide from the Hail Dent Repair team. Get a quote · Learn PDR properly · Phone 0408 020 468 · Disclaimer and terms