Plastic bumpers: what can be repaired?

Guide homeAll topicsDentsPaintVehicles & materialsSafetyFind a pro

DRAFT: general information, to be checked by a partner technician before publishing. It is not repair instructions for your vehicle; always follow the manufacturer's repair information.

Source-reviewed draft. Source review: done 24 October 2026 against public professional sources. Technician review: not done. Release decision: Jimmy.

Check your warranty and insurance first. Repairs you do yourself, or have done by someone the manufacturer has not approved, may void or reduce your paint, corrosion or other warranties, and may affect insurance claims, finance conditions and resale. Read your warranty booklet or ask the manufacturer or your insurer before you start. This is general information, not legal advice. Read more

Who is this for?

Everyone. Know-first page; the only DIY ideas are cleaning, reading the code and photographing the damage. Anything involving heat, welding or sensors is for a repairer.

Most modern bumper covers are moulded plastic. They flex, so many dents come out, but cracks, tears and broken mounting tabs need proper repair. Behind the cover there are often parking sensors, radar, cameras and crash absorbers.

Common automotive plastics

CodeWhat it isWhereRepairability
PP, TPO, TEO, PP+EPDMPolypropylene and blends; waxy and flexibleMost bumper covers, trims, wheel arch linersOften repairable by welding or two-part adhesive; needs special prep for paint
PEPolyethyleneFuel tanks (some), washer bottles, linersWelding possible; do not DIY fuel parts
ABSRigid, glossy, paintableGrilles, mirror housings, trimsAdhesive or welding; cracks common
PC and PC/ABSTough, rigidHeadlight lenses, some trimsNot a DIY material; headlights affect safety
PUR (urethane)Often yellowish on the backSome older or soft bumper coversWelding behaves differently; adhesives often used
SMC / fibreglassComposite sheet moulding compoundSome tailgates, bonnets, utility partsRepaired with resin and fibreglass, not heat-welded
UnknownNo code, odd behaviourAnyTreat as unknown; get advice

How to find the plastic code

  • Look on the back of the part: a moulded code in angle brackets such as >PP+EPDM< or >ABS<.
  • Photograph the code and send it with your quote request.
  • If there is no code, do not guess. A repairer may use a test weld on a hidden spot to match the right rod.
  • Some urethane parts smoke, bubble or brown when heated; that is a sign you have the wrong method (one reason not to try heat at home).

Bumper cover anatomy

  • Outer painted cover (flexible plastic), with clips and tabs to the body and an internal reinforcement beam.
  • Energy absorber (foam or plastic) between the cover and the beam.
  • Brackets, fog-light and tow-hook covers, undertray.
  • Parking sensors, radar and cameras in or behind the cover. They need correct positions and paint thickness to work, so damaged or re-fitted covers can affect safety systems.
Where to find the plastic code and how a bumper is builtTop: the back of a bumper cover with a moulded plastic code. Bottom: layers from the painted cover to the energy absorber, reinforcement beam and body, with a sensor in the cover.The back (inside face) of a bumper cover>PP+EPDM<A moulded code like this (example) tells a repairerwhich plastic it is. Photograph it. No code? Don’t guess;ask a repairer.Cross-section: typical bumper layers12341 Painted, flexible outer cover2 Energy absorber (foam or plastic)3 Reinforcement beam4 Vehicle body● Parking sensors, radar and cameras can sit in orbehind the cover. Correct position and paint thicknessmatter, so a damaged or refitted cover can affect them.
Generic and not to scale. Layers and codes differ by vehicle. Plastic type decides which repair methods work, so never guess.

Types of damage and what usually happens

  • Shallow dent, no crack: sometimes reshaped by a professional using controlled warming.
  • Scuffed or scratched paint, no dent: polish or touch-up (guide coming).
  • Crack or split: plastic welding or structural two-part adhesive (see plastic welding); professional recommended.
  • Torn tabs or missing mounts: see a professional; repair strength matters.
  • Dent plus cracked paint: paint repair needed after.
  • Radar or sensor behind the bumper: needs checking and recalibration after repair on many vehicles.

Pros and cons

GoodNot so good
  • Flexible plastics absorb minor impacts and often recover
  • Many cracks can be repaired instead of replacing the whole cover
  • Repair can be cheaper and more sustainable than replacement
  • Hard to know the plastic type without a code
  • Paint on plastic needs the right adhesion promoter and flexible paint
  • Cheap fixes can fail, or interfere with sensors

Do and don't

DoDon't
  • Read and photograph the code on the back
  • Clean first (the surface must be free of wax, silicone and grease)
  • Ask about sensors, radar and cameras before any repair
  • Use open flame or a hot heat gun
  • Use super glue or general adhesives on a structural crack
  • Drill or fill over sensors or radar areas
Stop rules: stop and get a quote if...
  • The bumper has radar, cameras or sensors in the damaged area
  • There is a crack that reaches a mounting tab or runs across the cover
  • The plastic is hot, melting, smoking or you smell fumes
  • You are not sure what the plastic is

Safety

  • Heat can burn you and distort or discolour plastic and paint. No open flame.
  • Some plastics release fumes when welded or overheated: ventilate and see safety.
  • Wear gloves and eye protection when sanding or cleaning with solvents.
Not sure? Don't touch it yet. Most damage is cheaper to fix properly than to fix twice. Get a quote or call 0408 020 468.

Sources and further reading

Source links are for background only. Several are industry or supplier pages, so treat product claims with care. Technician sign-off: pending.

Rapid Repair is a free guide from the Hail Dent Repair team. Get a quote · Learn PDR properly · Phone 0408 020 468 · Disclaimer and terms

Ever wondered how we fix dents without paint?

Learn the craft: a 51-video online course taught by a 20-year PDR technician, the PDR eBook on running a PDR business, or 1-on-1 hands-on training.

Start your 7 day free trial