Check your paint age and condition before any repair

Guide homeAll topicsDentsPaintVehicles & materialsSafetyFind a pro

DRAFT: general information, to be checked by a partner technician and a paint specialist before publishing. Not a substitute for a professional inspection.

Source-reviewed draft. Source review: done 24 October 2026 against public professional sources. Technician review: not done. Release decision: Jimmy.

Check your warranty and insurance first. Repairs you do yourself, or have done by someone the manufacturer has not approved, may void or reduce your paint, corrosion or other warranties, and may affect insurance claims, finance conditions and resale. Read your warranty booklet or ask the manufacturer or your insurer before you start. This is general information, not legal advice. Read more

Paint age and condition decide whether a dent can be repaired without paint, whether glue is safe, and whether polishing helps or harms. This 10-minute check tells you where you stand. It looks only; nothing here needs a tool that can damage paint.

What it is

A simple look at the paint using daylight, a torch and a few photos. It will not measure paint thickness, but it will spot the common warning signs.

Our paint-age rules

Paint ageWhat it means
Under about 7 years, well keptUsually good for small-dent paintless repair, but still check condition.
7 to 10 yearsPaint starts failing around here, especially dark paint, outdoor cars, and cars rarely washed or polished. Extra care.
About 10 years or olderTreat with care; expect a higher risk of cracking or lifting during repair.
Peeling or failing clear coat at any agePaintless repair is not applicable and pulling can damage what is left. See a professional.

Who it suits and tools

Anyone, before attempting or buying any repair. You need daylight (or a bright torch held low), a clean panel, a phone for photos and a clean cloth. No chemicals, no scraping.

The check, step by step (DIY-safe)

  1. Wash and dry the panel gently, or wipe with a clean damp microfibre cloth. Dirt hides problems.
  2. Work out the age: the build or compliance date is on the plate, and the registration paperwork helps. Note the colour; dark colours age faster.
  3. Look along the panel in daylight from a low angle. A healthy clear coat looks glassy and even. Look for dull or chalky patches, fine cracks like dried mud, rough patches, bubbles or flaking.
  4. Use a torch held low and to the side and move it slowly. Cracks, lifting edges and swirl marks show up.
  5. Check the edges and high spots: roof, bonnet, boot lid, door edges, around chips. Failure usually starts here.
  6. Check for a previous respray: colour or gloss that changes between panels, tape lines, overspray on rubber trim, different texture.
  7. Gentle fingertip check: run a clean fingertip lightly across. Roughness, lifting edges or a gritty feel is a warning. Do not scratch with a nail or tool.

Traffic light result

ResultWhat you sawWhat to do
GreenGlossy, even, no cracks, under about 7 yearsA small dent may suit paintless repair. Still get advice.
Amber7 to 10 years, dark or outdoor car, slight dullness, previous repaintBe careful. Get a professional opinion before any pulling or polishing.
RedPeeling, flaking, cracks, rust bubbles, chalky panel, 10 years plus with wearStop. Not a DIY or paintless job. See a professional.

Photo checklist to send us for a quote

  • Whole car from the front, back and both sides (shows context).
  • The whole panel, straight on, in daylight.
  • Close-up of the damage with a coin or ruler for scale.
  • The same damage lit from a low angle with a torch.
  • Any area of peeling, cracks or rust, close up.
  • Edges and roof of the damaged panel.
  • Build plate or compliance plate (age and paint code).
  • Anything you have already tried (glue, polish, filler, touch-up).

Send photos with a quote request or call 0408 020 468.

Pros and cons

Pros

  • Free, fast and safe.
  • Stops many bad repair attempts before they start.

Cons

  • Eyes and a torch cannot measure paint thickness or hidden cracks.
  • A professional gauge and experience see more.

Do and don't

Do

  • Check in good daylight.
  • Take photos before you change anything.
  • Tell the repairer about any past repaint.

Don't

  • Don't scrape, pick or scratch at paint.
  • Don't polish, sand or glue anything before you know the paint is healthy.

Common mistakes

  • Checking a dirty or wet panel.
  • Judging only the dent and ignoring the rest of the panel.
  • Assuming a newer-looking car has original paint.

Aftercare

Repeat the check every few months for cars over 7 years old, and after any hail or heavy sun season. If hail has hit the car, do not try to fix it yourself: Get a hail quote. Early action on small chips and dull patches is cheaper than a repaint later.

When to see a pro

Any amber or red result, or if you are unsure. It is free to ask: send photos with a quote request and get an honest answer on whether the repair is safe.

Not sure? Don't touch it yet. Most damage is cheaper to fix properly than to fix twice. Get a quote or call 0408 020 468. Send us clear photos and we'll tell you honestly what it needs.

Related guides

Paint basics · Check your paint age and condition · Scratches and scuffs · Chips and touch-up · Polishing and detailing

Sources and sign-off

Background reading used to prepare this draft. Several are trade or consumer blogs, so figures are approximate and vary by vehicle and manufacturer. Sign-off: technician name and date to be added before publishing.

Rapid Repair is a free guide from the Hail Dent Repair team. Get a quote · Learn PDR properly · Phone 0408 020 468 · Disclaimer and terms

Ever wondered how we fix dents without paint?

Learn the craft: a 51-video online course taught by a 20-year PDR technician, the PDR eBook on running a PDR business, or 1-on-1 hands-on training.

Start your 7 day free trial